2027 Toyota Camry Tire Size by Trim

The 2027 Toyota Camry comes with 3 factory tire sizes in Toyota's specifications: 205/65R16, 235/45R18, 235/40R19. The size depends on the trim and the wheel. The table below lists each size with the trims it is printed for in the source, plus the overall diameter and revolutions per mile calculated from the size code.

TrimFactory tire sizeDiameterRevs per mile
LEP205/65R1626.5 in761
XLE, SEP235/45R1826.3 in766
Nightshade, XSEP235/40R1926.4 in764

How to find the size on your own Camry

Trims, packages and model years can change the factory size. The size that applies to your vehicle is printed on the tire placard on the driver's door jamb and in the owner's manual. The size on the tires now fitted is molded into the sidewall, for example 205/65R16. If the placard and the tires do not match, a previous owner or a shop may have changed the size.

A "P" in front of the size means a P-metric passenger tire. "LT" means a light truck tire, which uses different load and inflation tables. Check the load index and speed rating on the placard before you buy replacements. How to read a tire sidewall explains each part of the code.

How much the factory sizes differ

The shortest factory size here is 235/45R18 (26.3 in) and the tallest is 205/65R16 (26.5 in). The difference in overall diameter is 0.63%. Each factory size goes with its own wheel, so this is not a reason to swap them. It shows how far a speedometer set for one size would be off on the other. Compare these two sizes in the calculator.

Tools and guides for these sizes

Changing to a different size? Check the speedometer error and revolutions per mile tools, or convert a size to inches with the tire size converter.

Sources

Sizes are copied from the manufacturer document above. Trims that the document does not print with a size code are not listed. Diameter and revolutions per mile are nominal values calculated from the size code, not measured values for a specific tire model. See how we calculate.

All vehicles